Functions for CON_SIL (connector) footprints. More...

Functions
int	con_sil_create_element ()
	Create an Element for a CON_SIL package.
int	con_sil_create_packages_list ()
	Create a list of CON_SIL packages with pre-defined values.
int	con_sil_drc ()
	Do some Design Rule Checking for the CON_SIL package type.
int	con_sil_get_default_footprint_values ()
	Look up default values for CON_SIL footprints.
int	con_sil_set_gui_constraints ()
	Set GUI constraints for the CON_SIL package type.
int	con_sil_write_footprint ()
	Write a CON_SIL pin through hole footprint.
	REGISTER_FUNCTIONS (con_sil_function_list)
	A list containing all CON_SIL related functions.
Variables
static fpw_function_t	con_sil_function_list []
	A list containing all CON_SIL related functions.

Detailed Description

Functions for CON_SIL (connector) footprints.

Author:: Copyright 2007, 2008, 2009, 2010, 2011 by Bert Timmerman <bert.timmerman@xs4all.nl>

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

Definition in file con_sil.c.

Function Documentation

int con_sil_create_element ( )

Create an Element for a CON_SIL package.

Returns:: EXIT_SUCCESS when an element was created, EXIT_FAILURE when errors were encountered.

Definition at line 36 of file con_sil.c.

References attributes_in_footprint, courtyard, courtyard_clearance_with_package, courtyard_length, courtyard_line_width, courtyard_width, create_attributes_in_element(), create_new_line(), create_new_pad(), create_new_pin(), TextType::Direction, FlagType::f, footprint_filename, footprint_name, footprint_refdes, footprint_type, footprint_value, ID, ElementType::MarkX, ElementType::MarkY, multiplier, ElementType::Name, number_of_rows, package_body_length, package_body_width, pad_clearance, pad_diameter, pad_length, pad_shape, pad_shapes_type, pad_solder_mask_clearance, pad_width, pin1_square, pin_drill_diameter, pitch_x, pitch_y, TextType::Scale, silkscreen_indicate_1, silkscreen_line_width, silkscreen_package_outline, TextType::TextString, verbose, TextType::X, and TextType::Y.

Here is the call graph for this function:

int con_sil_create_packages_list ( )

Create a list of CON_SIL packages with pre-defined values.

The data in this list can be used in a combo box to select a pre-defined package.

Returns:: EXIT_SUCCESS when a packages list was created, EXIT_FAILURE when errors were encountered.

Definition at line 327 of file con_sil.c.

int con_sil_drc ( )

Do some Design Rule Checking for the CON_SIL package type.

check for total number of pins is even.
check for number of rows is > 1.
check for number of columns is more than 1.
check for allowed pad shapes.
check for zero sized packages.
check for a zero sized courtyard.
check for minimum clearance between copper (X-direction).
check for minimum clearance between copper (Y-direction).
If any fiducials exist:
- check for zero fiducial pad diameter.
- check for zero width solder mask clearance.
- check for minimum clearance between copper (between pads and fiducials, if any fiducials exist).
check for clearance of the package length with regard to the courtyard dimensions.
check for clearance of the package width with regard to the courtyard dimensions.
check for any silk lines or texts touching bare copper.
check for soldermask clearance (solder mask overlapping copper at the solder fillet area or worse).
check for a reasonable silk line width.

Returns:: EXIT_SUCCESS when no DRC violations were encountered, EXIT_FAILURE when DRC violations were found.

Todo:: Check for any silk lines or texts touching bare copper.

Todo:: Check for soldermask clearance (solder mask overlapping copper at the solder fillet area or worse).

Definition at line 419 of file con_sil.c.

References courtyard_clearance_with_package, courtyard_length, courtyard_width, fiducial, footprint_name, footprint_type, MIL, MIL_100, MM, NO_UNITS, number_of_columns, number_of_rows, package_body_height, package_body_length, package_body_width, pad_clearance, pad_diameter, pad_shapes_type, pad_width, pitch_x, pitch_y, silkscreen_line_width, silkscreen_package_outline, units_type, and verbose.

Referenced by write_footprint().

int con_sil_get_default_footprint_values ( )

Look up default values for CON_SIL footprints.

Footprint values can be looked up by placing a question mark "?" in front of the footprint name.
If the footprint name is recognised the values will be loaded and the entries involved in the GUI will be updated accordingly.
Currently the following footprints are supported:
CON_SIL-127P-2N, CON_SIL-127P-3N, CON_SIL-127P-4N, CON_SIL-127P-5N, CON_SIL-127P-6N, CON_SIL-127P-7N, CON_SIL-127P-8N, CON_SIL-127P-9N, CON_SIL-127P-10N, CON_SIL-127P-12N, CON_SIL-127P-20N, CON_SIL-127P-24N, CON_SIL-127P-31N, CON_SIL-127P-36N, CON_SIL-127P-40N, CON_SIL-127P-50N, CON_SIL-254P-2N, CON_SIL-254P-3N, CON_SIL-254P-4N, CON_SIL-254P-5N, CON_SIL-254P-6N, CON_SIL-254P-7N, CON_SIL-254P-8N, CON_SIL-254P-9N, CON_SIL-254P-10N, CON_SIL-254P-12N, CON_SIL-254P-20N, CON_SIL-254P-24N, CON_SIL-254P-31N, CON_SIL-254P-36N, CON_SIL-254P-40N, CON_SIL-254P-50N, CON_SIL-350P-2N, CON_SIL-350P-3N, CON_SIL-350P-4N, CON_SIL-350P-5N, CON_SIL-350P-6N, CON_SIL-350P-7N, CON_SIL-350P-8N, CON_SIL-350P-10N, CON_SIL-350P-12N, CON_SIL-508P-2N, CON_SIL-508P-3N, CON_SIL-508P-4N, CON_SIL-508P-5N, CON_SIL-508P-6N, CON_SIL-508P-7N, CON_SIL-508P-8N, CON_SIL-508P-9N, CON_SIL-508P-10N, CON_SIL-508P-12N, CON_SIL-508P-24N,