Functions for CON-DIP footprints (Dual In line Connector with alternate pin order). More...

Functions
int	con_dip_create_element ()
	Create an Element for a CON-DIP package.
int	con_dip_create_packages_list ()
	Create a list of CON-DIP packages with pre-defined values.
int	con_dip_drc ()
	Do some Design Rule Checking for the CON-DIP package type.
int	con_dip_get_default_footprint_values ()
	Look up default values for CON-DIP footprints.
int	con_dip_set_gui_constraints ()
	Set GUI constraints for the CON-DIP package type.
int	con_dip_write_footprint ()
	Write a CON-DIP pin through hole footprint.
	REGISTER_FUNCTIONS (con_dip_function_list)
	A list containing all CON-DIP related functions.
Variables
static fpw_function_t	con_dip_function_list []
	A list containing all CON-DIP related functions.

Detailed Description

Functions for CON-DIP footprints (Dual In line Connector with alternate pin order).

Author:: Copyright 2007, 2008, 2009, 2010, 2011 by Bert Timmerman <bert.timmerman@xs4all.nl>

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

Definition in file con_dip.c.

Function Documentation

int con_dip_create_element ( )

Create an Element for a CON-DIP package.

Returns:: EXIT_SUCCESS when an element was created, EXIT_FAILURE when errors were encountered.

Definition at line 37 of file con_dip.c.

References attributes_in_footprint, courtyard, courtyard_clearance_with_package, courtyard_length, courtyard_line_width, courtyard_width, create_attributes_in_element(), create_new_line(), create_new_pad(), create_new_pin(), TextType::Direction, FlagType::f, footprint_filename, footprint_name, footprint_refdes, footprint_type, footprint_value, ID, ElementType::MarkX, ElementType::MarkY, multiplier, ElementType::Name, number_of_columns, number_of_rows, package_body_length, package_body_width, pad_clearance, pad_diameter, pad_length, pad_shape, pad_shapes_type, pad_solder_mask_clearance, pad_width, pin1_square, pin_drill_diameter, pitch_x, pitch_y, TextType::Scale, silkscreen_indicate_1, silkscreen_line_width, silkscreen_package_outline, TextType::TextString, verbose, TextType::X, and TextType::Y.

Here is the call graph for this function:

int con_dip_create_packages_list ( )

Create a list of CON-DIP packages with pre-defined values.

The data in this list can be used in a combo box to select a pre-defined package.

Returns:: EXIT_SUCCESS when a packages list was created, EXIT_FAILURE when errors were encountered.

Definition at line 371 of file con_dip.c.

int con_dip_drc ( )

Do some Design Rule Checking for the CON-DIP package type.

check for total number of pins is even.
check for number of rows is more than 1.
check for number of columns is 2.
check for allowed pad shapes.
check for zero sized packages.
check for a zero sized courtyard.
check for minimum clearance between copper (X-direction).
check for minimum clearance between copper (Y-direction).
If no fiducials exist.
check for clearance of the package length with regard to the courtyard dimensions.
check for clearance of the package width with regard to the courtyard dimensions.
check for any silk lines or texts touching bare copper.
check for soldermask clearance (solder mask overlapping copper at the solder fillet area or worse).
check for a reasonable silk line width.

Returns:: EXIT_SUCCESS when no DRC violations were encountered, EXIT_FAILURE when DRC violations were found.

Todo:: Check for any silk lines or texts touching bare copper.

Todo:: Check for soldermask clearance (solder mask overlapping copper at the solder fillet area or worse).

Todo:: Create attributes here.

Definition at line 406 of file con_dip.c.

References courtyard_clearance_with_package, courtyard_length, courtyard_width, fiducial, footprint_name, footprint_type, MIL, MIL_100, MM, NO_UNITS, number_of_columns, number_of_pins, number_of_rows, package_body_height, package_body_length, package_body_width, pad_clearance, pad_diameter, pad_length, pad_shapes_type, pad_width, pitch_x, pitch_y, silkscreen_line_width, silkscreen_package_outline, units_type, and verbose.

Referenced by write_footprint().

int con_dip_get_default_footprint_values ( )

Look up default values for CON-DIP footprints.

Footprint values can be looked up by placing a question mark "?" in front of the footprint name.
If the footprint name is recognised the values will be loaded and the entries involved in the GUI will be updated accordingly.
Currently the following footprints are supported: