PCB-FPW developer documentation based on version: 0.0.11

Functions | Variables

resmelf.c File Reference

Functions for RESMELF footprints. More...

Go to the source code of this file.

Functions

int resmelf_create_element ()
 Create an Element for a RESMELF package.
int resmelf_create_packages_list ()
 Create a list of known RESMELF packages.
int resmelf_drc ()
 Do some Design Rule Checking for the RESMELF package type.
int resmelf_get_default_footprint_values ()
 Look up default values for a RESMELF footprint.
int resmelf_set_gui_constraints ()
 Set GUI constraints for a RESMELF package type.
int resmelf_write_footprint ()
 Write a footprint with two pads for a RESMELF package.
 REGISTER_FUNCTIONS (resmelf_function_list)
 A list containing all RESMELF related functions.

Variables

static fpw_function_t resmelf_function_list []
 A list containing all DIOMELF related functions.

Detailed Description

Functions for RESMELF footprints.

Author:
Copyright 2007, 2008, 2009, 2010, 2011 by Bert Timmerman <bert.timmerman@xs4all.nl>

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

Definition in file resmelf.c.


Function Documentation

REGISTER_FUNCTIONS ( resmelf_function_list   ) 

A list containing all RESMELF related functions.

Initialise by registering all RESMELF related functions.

Definition at line 1130 of file resmelf.c.

int resmelf_create_element (  ) 
int resmelf_create_packages_list (  ) 

Create a list of known RESMELF packages.

The data in this list can be used in a combo box to select a pre-defined package.

Returns:
EXIT_SUCCESS when a packages list was created, EXIT_FAILURE when errors were encountered.

Definition at line 392 of file resmelf.c.

int resmelf_drc (  ) 

Do some Design Rule Checking for the RESMELF package type.

  • check for allowed pad shapes.
  • check for zero sized packages.
  • check for a zero sized courtyard.
  • check for minimum clearance between copper (X-direction).
  • check for minimum clearance between copper (Y-direction).
  • check for fiducials.
  • check for clearance of the package length with regard to the courtyard dimensions.
  • check for clearance of the package width with regard to the courtyard dimensions.
  • check for any silk lines or texts touching bare copper.
  • check for soldermask clearance (solder mask overlapping copper at the solder fillet area or worse).
  • check for a reasonable silk line width.
Returns:
EXIT_SUCCESS when no DRC violations were encountered, EXIT_FAILURE when DRC violations were found.

Todo:
Check for any silk lines or texts touching bare copper.
Todo:
Check for soldermask clearance (solder mask overlapping copper at the solder fillet area or worse).

Definition at line 424 of file resmelf.c.

References courtyard_clearance_with_package, courtyard_length, courtyard_width, fiducial, footprint_name, footprint_type, MIL, MIL_100, MM, NO_UNITS, number_of_pins, package_body_height, package_body_length, package_body_width, pad_clearance, pad_length, pad_shapes_type, pad_width, pitch_x, pitch_y, silkscreen_line_width, silkscreen_package_outline, units_type, and verbose.

Referenced by write_footprint().

int resmelf_get_default_footprint_values (  ) 

Look up default values for a RESMELF footprint.

Footprint values can be looked up by placing a question mark "?" in front of the footprint name.
If the footprint name is recognised known values will be loaded and the entries involved in the GUI will be updated accordingly.
Currently the following footprints are supported:

  • RESMELF
Returns:
EXIT_SUCCESS when default values for a footprint were found, EXIT_FAILURE when the footprint name was not found.

Definition at line 711 of file resmelf.c.

References count_x, count_y, courtyard_length, courtyard_line_width, courtyard_width, fiducial, fiducial_pad_diameter, fiducial_pad_solder_mask_clearance, footprint_name, footprint_units, number_of_columns, number_of_pins, number_of_rows, package_body_height, package_body_length, package_body_width, package_is_radial, pad_length, pad_shape, pad_shapes_type, pad_width, pitch_x, pitch_y, silkscreen_length, silkscreen_line_width, silkscreen_width, thermal, thermal_length, and thermal_width.

Referenced by on_footprint_name_entry_changed().

int resmelf_set_gui_constraints (  ) 

Set GUI constraints for a RESMELF package type.

This function is only to be compiled for GUI targets.

Returns:
EXIT_SUCCESS when the function is completed.

Definition at line 767 of file resmelf.c.

References gui_constraints_disable_heel_and_toe_goals_tab_widgets(), gui_constraints_disable_thermal_tab_widgets(), UPPER_LEFT, and widget.

Referenced by on_footprint_type_entry_changed().

Here is the call graph for this function:

int resmelf_write_footprint (  ) 

Variable Documentation

A list containing all DIOMELF related functions.

Definition at line 1084 of file resmelf.c.