PCB-FPW developer documentation based on version: 0.0.11

Functions | Variables

indc.c File Reference

Functions for INDC SMT footprints. More...

Go to the source code of this file.

Functions

int indc_create_element ()
 Create an Element for an INDC SMT package.
int indc_create_packages_list ()
 Create a list of INDC packages with pre-defined values.
int indc_drc ()
 Do some Design Rule Checking for the INDC package type.
int indc_get_default_footprint_values ()
 Look up default values for INDC SMT footprint.
int indc_set_gui_constraints ()
 Set GUI constraints for the INDC SMT package type.
int indc_write_footprint ()
 Write a INDC SMT footprint with two pads for a chip package.
 REGISTER_FUNCTIONS (indc_function_list)
 Initialise by registering all INDC related functions.

Variables

static fpw_function_t indc_function_list []
 A list containing all INDC related functions.

Detailed Description

Functions for INDC SMT footprints.

Author:
Copyright (C) 2007, 2008, 2009, 2010, 2011 by Bert Timmerman <bert.timmerman@xs4all.nl>

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

Definition in file indc.c.


Function Documentation

int indc_create_element (  ) 
int indc_create_packages_list (  ) 

Create a list of INDC packages with pre-defined values.

The data in this list can be used in a combobox to select a pre-defined package.

Returns:
EXIT_SUCCESS when a packages list was created, EXIT_FAILURE when errors were encountered.

Definition at line 307 of file indc.c.

int indc_drc (  ) 

Do some Design Rule Checking for the INDC package type.

  • check for allowed pad shapes.
  • check for zero sized packages.
  • check for a zero sized courtyard.
  • check for minimum clearance between copper (X-direction).
  • check for minimum clearance between copper (Y-direction).
  • If any fiducials exist:
    • check for zero fiducial pad diameter.
    • check for zero width solder mask clearance.
    • check for minimum clearance between copper (between pads and fiducials, if any fiducials exist).
  • check for clearance of the package length with regard to the courtyard dimensions.
  • check for clearance of the package width with regard to the courtyard dimensions.
  • check for any silk lines or texts touching bare copper.
  • check for soldermask clearance (solder mask overlapping copper at the solder fillet area or worse).
  • check for a reasonable silk line width.
Returns:
EXIT_SUCCESS when no DRC violations were encountered, EXIT_FAILURE when DRC violations were found.

Todo:
Check for any silk lines or texts touching bare copper.
Todo:
Check for soldermask clearance (solder mask overlapping copper at the solder fillet area or worse).

Definition at line 353 of file indc.c.

References courtyard_clearance_with_package, courtyard_length, courtyard_width, fiducial, footprint_name, footprint_type, MIL, MIL_100, MM, NO_UNITS, number_of_pins, package_body_height, package_body_length, package_body_width, pad_clearance, pad_length, pad_shapes_type, pad_width, pitch_x, pitch_y, silkscreen_line_width, silkscreen_package_outline, units_type, and verbose.

Referenced by write_footprint().

int indc_get_default_footprint_values (  ) 

Look up default values for INDC SMT footprint.

Footprint values can be looked up by placing a question mark "?" in front of the footprint name.
If the footprint name is recognised known values will be loaded and the entries involved in the GUI will be updated accordingly.
Currently the following footprints are supported:

  • INDC1005X60N,
  • INDC1608X95N,
  • INDC2520X220N,
  • INDC3225X135N,
  • INDC4509X190N,
  • INDC4532X175N,
  • INDC4648X310N,
  • INDC5750X180N,
  • INDC6350X200N.
Returns:
EXIT_SUCCESS when default values for a footprint were found, EXIT_FAILURE when the footprint name was not found.

Definition at line 648 of file indc.c.

References count_x, count_y, courtyard_length, courtyard_line_width, courtyard_width, footprint_name, footprint_units, number_of_columns, number_of_pins, number_of_rows, package_body_height, package_body_length, package_body_width, package_is_radial, pad_length, pad_shape, pad_shapes_type, pad_width, pitch_x, pitch_y, silkscreen_length, silkscreen_line_width, silkscreen_package_outline, silkscreen_width, thermal, thermal_length, thermal_width, and verbose.

Referenced by on_footprint_name_entry_changed().

int indc_set_gui_constraints (  ) 

Set GUI constraints for the INDC SMT package type.

This function is only to be compiled for GUI targets.

Returns:
EXIT_SUCCESS when the function is completed.

Definition at line 1012 of file indc.c.

References gui_constraints_disable_heel_and_toe_goals_tab_widgets(), gui_constraints_disable_thermal_tab_widgets(), UPPER_LEFT, and widget.

Referenced by on_footprint_type_entry_changed().

Here is the call graph for this function:

int indc_write_footprint (  ) 
REGISTER_FUNCTIONS ( indc_function_list   ) 

Initialise by registering all INDC related functions.

Definition at line 1286 of file indc.c.


Variable Documentation

A list containing all INDC related functions.

Definition at line 1249 of file indc.c.